Stripping wood mouldings-How to Remove Paint from Trim and Molding - Bob Vila

Im wondering if it is more cost effective to remove and replace the moldings in my home or to have the existing trim with over 75 years of paint stripped and refinished. Any info will help. The old doors can be utilized elsewhere. I feel the need to defend pine a bit. Today the pine forests of the South have been cut several times over and this newly harvested wood exhibits very few of the qualities that made heart pine the wood of choice up until the early 20th century.

Stripping wood mouldings

Stripping wood mouldings

Stripping wood mouldings

Stripping wood mouldings

Stripping wood mouldings

It's too cheap to worry about stripping. Stripping wood mouldings you run into some stubborn paint, just re coat it with stripper. Once she finished, she missed the challenge so much she looked for another house on which to work. I agree with Pumpkin Stalker. Choose a wood bleach formulated to remove pigment-based color, rather than household bleach, which Water blows from exhaust pipe skin and mucous membranes Stripping wood mouldings removes only dye-based color. The house looks pretty good now, Striping more important, we live like regular people, with time on weekends for bike rides, watching movies, and having friends over for dinner. View all Building Materials. It's called the Silent Paint Remover and I really can't say enough great things about it. Brownstoner Services Want to make your home better?

Fencing instruction dripping springs. Brownstoner Services

Opt for construction-grade gloves for scraping and heat Stripping wood mouldings. The TOH pros offer advice on your nouldings difficult interior and exterior paint, painted flooring, and paint-removal By pulling the blade at an approximately degree angle, you will safely remove loosened paint without digging chunks out of the wood. Tape all edges shut or seal in heavy-duty trash bags for disposal. Sign up using Facebook. Choose a wood bleach formulated to remove pigment-based color, rather than household bleach, which irritates skin and mucous membranes and removes only dye-based color. Old White southern girls getting fucked cards or gift cards can be repurposed as custom scrapers Sfripping cutting them to match the surface you need to strip. Photo by Katrina Kennedy www. By far, taking the wood off Stripping wood mouldings wall, stripping it and putting it back is faster and safer. Make sure the lighting is good, use extremely light pressure, and take frequent breaks until the job is complete.

Like many buildings dating to around , the house mixes elements from several architectural styles, blending a Foursquare form, Colonial Revival entry, and Shingle treatment in windows and bays.

  • By using our site, you acknowledge that you have read and understand our Cookie Policy , Privacy Policy , and our Terms of Service.
  • Finding out which wood stripping method to use, and how to contain the debris, makes a messy job cleaner, safer, and more effective.
  • Walls framed by baseboards and crown molding exude unmistakable character and polish, most notably in historical homes adorned by ornate crown moldings, built-in bookcases, and pocket doors.
  • .

  • .

  • .

Walls framed by baseboards and crown molding exude unmistakable character and polish, most notably in historical homes adorned by ornate crown moldings, built-in bookcases, and pocket doors. While removing layers of paint from intricate trim is labor-intensive, the right tools and techniques and a little patience can return even the most elaborate moldings and custom woodwork to their former good looks.

First, pull on your protective gear—old clothing, goggles, a respirator mask, and solvent-resistant gloves—and then start prepping your work area. While a few of the newer paint strippers on the market are low-VOC, which means that they contain fewer volatile organic compounds, many emit toxic fumes, so adequate ventilation is essential. The upside to stripping paint from trim is that you can do a little bit here and there, as time permits.

Next, apply paint stripper to the trim or molding with a natural-bristle paintbrush. Plastic bristles can melt when dipped in stripper. Not all strippers work the same way. Some aggressive strippers soften paint in as little as 30 minutes, while others require hours of wait time and repeated applications. Some are runny, and some have a gel consistency. Brush on only as much stripper as you have the time to scrape after the paint loosens. By pulling the blade at an approximately degree angle, you will safely remove loosened paint without digging chunks out of the wood.

If the trim has multiple layers of old paint, as is common in many historical homes, you may have to repeat stripper application and scraping until you reach bare wood. Sand the trim with grit sandpaper or, better yet, an grit foam sanding block, which more easily fits itself to the curves and creases found in trim work.

Always sand in the direction of the wood grain to avoid leaving cross-sanding marks. When the wood is no longer rough and the dried bits of residual paint have been rubbed off, switch to grit for extra smoothness. Proceed with great caution, though, as one slip can gouge the wood. Make sure the lighting is good, use extremely light pressure, and take frequent breaks until the job is complete.

In some cases, the old paint may leave behind a tinge of color on the wood grain. Wood bleaching removes color stains, but it also lightens the natural wood grain. Choose a wood bleach formulated to remove pigment-based color, rather than household bleach, which irritates skin and mucous membranes and removes only dye-based color.

Most wood bleach products come in liquid form, which is then wiped on with a clean rag and left to dry. Make sure the wood is thoroughly dry before applying stain or other coating. This post has been brought to you by Hyde Tools.

Its facts and opinions are those of BobVila. Photo: istockphoto. Photo: hydetools.

The heat draws moisture from the wood, improving its ability to hold new paint. Linked 4. Wear disposable coveralls or old pants and a long-sleeve shirt to protect your skin. Exposure can raise your blood pressure, stress your nervous system, and damage your memory, among other risks. Heat works very well, but be very careful to test it as you go and not to burn it. Dwell time: 3 to 24 hours Removal: Scrape off the paint, scrub off the residue with a wet nylon brush, and rinse with water. On the downside, the process can generate a lot of moisture and saturate wood.

Stripping wood mouldings

Stripping wood mouldings. 100% Satisfaction Guarantee

Whether it cracks and blisters or just forms a lumpy blanket of pigments and binders, it begs to come off. The ideal way to start over is to strip furniture of the old stuff and begin with a baby-smooth, bare wood surface. Getting there is tedious, dirty work, no doubt, but our start-to-finish guide will help you manage the mess and choose the best paint strippers, scrapers and techniques to get the results you want.

He recommends finding a hidden spot, such as inside a drawer or closet, and using a scraper to shave a test patch through the various paint layers. If the bottom layer is paint, it's a good sign that the wood is unworthy of stain.

It's always better to determine beforehand that a job is too big, complicated, or dangerous to tackle yourself. In that case, you have a couple of options. Send it out: If the pieces you want to strip are easily removable such as doors, windows, or furniture and feature intricate detailing like mantel-pieces or stair parts , consider sending them out to a professional with a dip tank; pros use these special vats to soak entire pieces in liquid paint removers for faster, more thorough results.

Hire in: If you have a house's worth of trim or siding that must be stripped bare quickly, or if you have lead-laden paint and can't remove it safely, bring in a qualified pro to do it on-site.

Visit the EPA's website for certified lead-removal experts. Heaters use high temperatures to soften varnishes or multiple layers of paint so that the gunk can easily be removed with a scraper. They minimize dust and can lift years of paint. Chemical strippers are liquids, gels, or pastes that dissolve paint. No dust. No paint chips. They're ideal for fine details, awkward shapes, and hitting spots you may have missed with a heat gun.

Sanders, including power sanding disks and clapboard sanders, grind away paint. They're great for large, flat exterior surfaces but, unless hooked up to a vacuum to capture dust, ill-advised for indoor work and anything with lead-based paint.

Heat is a tried-and-true method for softening thick layers of paint on flat surfaces or in tight spaces. The trick is to find the right temperature; too low and the job takes forever, too high and you could create harmful vapors, char the wood—or even set the house on fire.

Heat guns look like high-powered hair dryers and blast hot, concentrated air through a nozzle to loosen paint. Most models have high and low settings, but burns and fires can result even on the lowest setting if you let the gun rest in one place for too long.

Infrared devices use infrared rays to heat up and loosen the bond between paint and its substrate without generating noise or dust. They work quickly; a second blast can soften decades of paint. The heat draws moisture from the wood, improving its ability to hold new paint. But these tools are bulky see example, above and hard to use in tight spaces.

Steam strippers use water vapor to soften paint without heating it above degrees F, eliminating fire risks. And the condensation minimizes dust and fumes. On the downside, the process can generate a lot of moisture and saturate wood. Heat stripping is like a tango between the hand holding the heater and the one with the scraper. Hover the device over the surface. When the paint bubbles, slowly move the heater along and try to develop a rhythm so that you're scraping and heating in unison.

Keep a metal paint tray handy for when you take a break and need to set the device down. If you're going to use a chemical stripper, know that anything that eats paint is dangerous and that doing the job without methylene chloride see above will be safer but slower. These wood stripping products contain less toxic, less noxious ingredients and remove both latex and oil paints. SmartStrip: A paste with a frosting-like consistency that can be brushed, rolled, or sprayed on.

Clings well to vertical surfaces. Active ingredient: Benzyl alcohol Strength: One coat removes up to 15 layers of paint. Dwell time: 3 to 24 hours Removal: Scrape off the paint, scrub off the residue with a wet nylon brush, and rinse with water. This paste works with a paper cover to control evaporation.

Ideal for lead paint and masonry, but can stain furniture woods. Active ingredient: Lye Strength: Up to 30 layers of paint can come off as easily as stripping sheets off a bed. Dwell time: 12 to 24 hours Removal: Peel off the paper and scrub the surface with a wet brush; let dry thoroughly, then apply a neutralizing solution.

Dwell time: 30 minutes to 24 hours Removal: Scrape off the paint with a plastic scraper, and use an abrasive pad and mineral spirits to remove any lingering residue.

Years ago, if you needed a fast-acting chemical paint stripper, you chose a product that contained a seriously noxious chemical called methylene chloride also called dichloromethane, or DCM , cranked up the fan, and got the job done quickly. Generally speaking, the faster a chemical eats through paint and finish, the more toxic it is, and DCM is fast—paint starts to bubble in minutes.

But this paint stripper is also dangerous. Prolonged exposure to DCM, through the lungs or skin, has been linked to liver damage, cancer, and even death. The vapors can overwhelm air-purifying respirators, and just a few whiffs can leave you wheezing and dizzy. Europe banned it for residential use in While DCM-containing paint strippers are still widely sold in the U. Our advice: Check your labels and steer clear.

No paint-stripping endeavor is complete without an arsenal of scrapers to usher away softened paint. After that, replace or resharpen the blades. Nearly 90 percent of homes built before have some paint laden with this toxic metal. Although its use went into steep decline after , lead-based paint wasn't banned in the U.

Here's how to detect it. A bright red color indicates lead is present. Lab test: Scrape a table-spoon of chips into a bag and send them to a lab for testing. Call a pro: For a few hundred dollars, a licensed lead inspector will conduct an X-ray fluorescence test to identify the amount of lead present in all the painted surfaces in your home.

Lead is nasty. Sand the trim with grit sandpaper or, better yet, an grit foam sanding block, which more easily fits itself to the curves and creases found in trim work. Always sand in the direction of the wood grain to avoid leaving cross-sanding marks. When the wood is no longer rough and the dried bits of residual paint have been rubbed off, switch to grit for extra smoothness.

Proceed with great caution, though, as one slip can gouge the wood. Make sure the lighting is good, use extremely light pressure, and take frequent breaks until the job is complete.

In some cases, the old paint may leave behind a tinge of color on the wood grain. Wood bleaching removes color stains, but it also lightens the natural wood grain. Choose a wood bleach formulated to remove pigment-based color, rather than household bleach, which irritates skin and mucous membranes and removes only dye-based color. Most wood bleach products come in liquid form, which is then wiped on with a clean rag and left to dry. Make sure the wood is thoroughly dry before applying stain or other coating.

This post has been brought to you by Hyde Tools. Its facts and opinions are those of BobVila. Photo: istockphoto.

Stripwood | Mouldings | fiddley.com

Im wondering if it is more cost effective to remove and replace the moldings in my home or to have the existing trim with over 75 years of paint stripped and refinished. Any info will help. The old doors can be utilized elsewhere. I feel the need to defend pine a bit. Today the pine forests of the South have been cut several times over and this newly harvested wood exhibits very few of the qualities that made heart pine the wood of choice up until the early 20th century. You should definitely find out what kind of wood you have.

We replaced the baseboards, refinished the floors, and installed pre-painted shoe molding last. We replaced the baseboards with wood that was a little bit taller, which hid the patching required after removing the old boards. No demo- no landfill- no manufacturing new- no transporting.

I know the usual advice on the forum is to keep the original moldings no matter what. On what? On what kind of wood you are stripping, for one. What is the overall condition of the wood? Is it heavily pitted and gouged or even have whole chunks missing? On top of that, the final appearance you are hoping for,even with restoration, may still be less than optimum. In a recent gut reno of our kitchen, however, we chose to go with trim replacements.

The original moldings had years worth of paint on them and the nicks and gouges in the wood were way too many to count. Especially since this is a period white kitchen, and we were intending to paint the trim white anyway, we went with reproduction work that is a near-faithful copy of the moldings in the other parts of the house. The topnotch carpentry crew that did the work produced a look which is historically appropriate, super crisp and clean.

In some places, such as with the base and shoe moldings for example, the new trim work appears even more elegant than that of the original.

He does really excellent work. To find out what kind of wood it is. His guys are currently stripping door and window frames for me in Cobble Hill — email me mhmela aol.

I have a few I need stripped and have been looking for someone good. While I have no idea about the cost, keep in mind that removing your old trim will produce an amazing amount of waste that will go to a landfill. Contact About Advertise 0 shares. LOG IN. Login in to your account. Recover your password. Follow Us. Forum Archives Click here to join the conversation on the live forum. Thanks all for chiming in. This gives me a real sense of what this will involve.

Is there a number where you can be reached? Joe Salem Woodzone Brownstoner Services Want to make your home better? Copyright - BlankSlate Factory, Inc.

Stripping wood mouldings

Stripping wood mouldings