Can you paint tile floors? Painting the ceramic tile floors in our first floor bathroom was one of those projects for me! I decided I was going to paint my bathroom floors way back in when I was making over my space for the One Room Challenge but the stenciling of the bathroom walls took so long that I ran out of time to do it before my big reveal. Somehow THREE full years went by with me giving the stink eye to those floors every time I used the bathroom but doing nothing about it. Well I finally knocked this little DIY project out and it was so cheap and easy.
DO NOT use a polyurethane on top of your floor, especially if you have used white paint. Did the final topcoat ever peel off or come up anywhere on this floor? A few of them have, but some Vihtage hesitant that it will be to plain. Is this ok to do in a bigger Austin lesbian and higher traffic area? Did you ever do this, Mandi? The professional cleaner said it is the one product that will breakdown the urine. Thanks for the tips, I Vintage floor painting it will come in handy again! Learn how your comment data is processed. Your bathroom is beautiful Vintage floor painting the directions were so simple! It had some areas of wear, but overall still looked great.
Whitikers words latin. Nav Social Menu
Saved me money to buy on sale! Recommended For You. More in Painting Turn a worn floor into a cottage classic with a simple checkerboard pattern. Want to hire a pro for this project? By Height. Contact Us Questions? I would appreciate your assessment on the the process I am intending to do which is as follows using water based products; — Primer with stain blocker 1 or 2 coats? A brush will give a smoother finish, but a roller is faster. Calculating the pattern requires some math, but the painting is a cinch. Also, any water product leaves a white residue. Orders placed by AM Central Time using second day or next day will ship the same day. Thanks for sharing your experience Vntage the TodaysHomeowner. Pin this product Vintage floor painting Pinterest. The paint I used was a acrilic for wood floor it s white and wonderfull paintijg if I want to Vintaeg my house it s easier if the wood can go back to the natural color What Bare escentuals eye starter kit reviews I use for take the paint away? Using a sanding sponge, gently rough up the floor finish and apinting any high spots from previous stain Vintage floor painting filler.
No matter what your decorating style is, you can finish off the look beautifully with Royal Design Studio Stencils.
- The burgundy red floor in the master bedroom of Sara and Andrew's Massachusetts farmhouse didn't fit the fresh and energetic personality of the newlyweds.
- This summer, I committed what any self-respecting lover of natural building materials would call a cardinal sin.
- They are very durable and have an easy to clean non-slip vinyl surface.
- Floor lamps are a great way to provide lighting to your home.
- Exclusions apply.
You can even stencil over your old dated tile instead of removing it! Just make sure to clean the floor thoroughly and then use an adhesive primer such as Stix, to ensure proper adhesion.
Our Floor stencils can be used on cement floors, decks, patios, wood floors and even linoleum. Learn How to stencil floors and add some pattern and color to your floors with our reusable Floor stencils! For some stenciled floor ideas, please visit our Stencil Ideas gallery.
Items 1 - 30 of Floor Stencils Our Floor stencils are perfect for creating custom painted floors in any space! View as Grid List. Show 30 60 Tea House Trellis Wall Stencil. Add to Cart. Add to Wish List Add to Compare. Prosperity Mandala Stencil. Antalya Tile Stencil. Calista Tile Stencil. Indian Inlay Furniture Stencil Kit. Polanka Tile Stencil. Augusta Tile Stencil. Star Tile Stencil. Nola Tile Stencil. Passion Mandala Stencil. Amalfi Tile Stencil.
Nagoya Tile Stencil. Honeycomb Allover Stencil. Florenza Tile Stencil. Santa Ana Tile Stencil. Aphrodite Tile Stencil. Diamant Tile Stencil. Granada Tile Stencil. Felicity Tile Stencil. Kerala Tile Stencil.
Primavera Tile Stencil. Maestro Tile Stencil. Brush Strokes Wall Stencil. Aztec Tile Stencil. Metro Hex Tile Stencil.
Alatera Tile Stencil. Fabiola Tile Stencil. Santa Rosa Tile Stencil. Basilica Tile Stencil. Marlen Tile Stencil.
Thanking you, Tim. Setting a checker pattern on a diagonal looks dynamic and makes the room appear bigger. Give new, vibrant life to old floors at a fraction of the cost of replacing or refinishing. You May Also Like. By Rug Material. You will have to pull up the floors and replace. By Back Height.
Vintage floor painting. shop categories
Recently came across a paint WB50 recommended as a floor paint. A two foot square section of the floor was completely black from pets peeing on the carpet in that spot. I was sure we would have to cut that section out and replace it. I saturated it everyday for a several days with full strength Sol-U-Mel, letting it dry out between.
The stain kept getting lighter and it was completely deodorized and did not need replaced. Liquid clothes softener, pour on pet unrine stains, no matter how soaked in, it will pull it up and deodorize. I bought an old Arts and Crafts house that had issues with dogs being left unattended, it was awful. The softener worked. We did that first, pulled up all we could with the softener, and then sanded. You would never know there were dogs in the house.
Older info but still relevant! Even if you can sand, bleach and re-stain so it looks OK there will be a faint odor discernible only to cats and dogs unless the floor is sealed with shellac-based primer. That means any pets who enter that room may decide to pee in the same old spot! I own two cats and may someday have a dog so I opted to head off trouble before it occurs. Hence my decision to seal and paint rather than refinish. Thanks for the help! I have a few hundred square feet of salvaged wood flooring that I want to paint.
Is there a substance i can use to fill in before painting? It looks terrible now with one coat on, worse than ever if that is possible. We were fortunate to find that under carpet we removed there was another carpet that was hammered down. After all the laughing and pulling up nails we realized it looked like a distressed wood floor. Color was fine so I mopped with Liquid Gold and am happy with the easiest makeover ever.
Btw Liquid gold soaked in and the floor was a little darker. We had an issue with pet stains on our wood floors after pulling up carpet. Spray it liberally with hydrogen peroxide and it will bubble up right out of the wood. May have to do a couple of times on heavy soils but takes the stain and smell right out. Thanks for sharing your experience with the TodaysHomeowner.
Take care. Another good choice for painting wood floors is a pre catalised water baawd epoxy. Its dey in few hours that you can walk on it gently almost no oder its hard enough that in about a week you can take 80 grit sand paper to it with out causing little to no harm. After 2 weeks you could take a hammer to it and never know it. It will go on over just about anything and stick. Used ir on my entey way and family room we have 3 big dogs and I got tired of them scratching the floor Problem resolved.
Can you tell me more about how you did your floor with the epoxy? Save my name, email, and website in this browser for the next time I comment. Today's Homeowner. Expert Advice on Improving Your Home. Using a roller to paint our wood floor. Floor with patches before painting. Brighten up dark spaces, or anchor bright spaces.
Give new, vibrant life to old floors at a fraction of the cost of replacing or refinishing. While the green paint we tried first was nice, it wasn't the look we wanted.
This darker paint color was more to our liking. Choosing Your Paint For best results, go with a standard oil-based porch and floor paint or oil-based enamel. Follow these steps when painting a floor: Step 1: Rough Surface: Using a square pad sander or by hand , rough up the finish on the floor with grit sandpaper. Step 2: Clean Floor: Thoroughly vacuum and damp-mop the floors, to remove all the dust. Allow them to dry completely.
Brush or roll on the paint. Step 3: Apply First Coat: Using a brush or roller, apply the first thin coat of floor paint. A brush will give a smoother finish, but a roller is faster. Step 4: Smooth Paint: Lightly go over the floor with grit sandpaper, to smooth out the grain and give a sleek surface, then clean the floor to remove all the dust.
Step 5: Apply Second Coat: Apply a second thin coat in the same manner. Paint your way towards the door, then get yourself out of those fumes! Some paints may require up to three coats. Step 6: Decorative Touch: After your base coat is good and dry, you can add stripes, motifs, or other designs.
Step 7: Seal Floor Optional : For high-traffic areas, you may want to coat the finished floors with a clear polyurethane. Step 8: Let Paint Cure: Within a few days, you should be able to walk gently on the floors, but it will be several weeks before the paint is fully cured and the smell goes away.
What brand and color is the dark brown paint? How durable are the painted floors? Furniture, pets, kids? Could you tell me what brand and color the green is that you started with? Thank you!!! IS it possible to take the paint off if I want after all? I would appreciate your assessment on the the process I am intending to do which is as follows using water based products; — Primer with stain blocker 1 or 2 coats?
Hope that helps. Please, professional only answers are appreciated. Thanks for this article! Thanks again! Wondering if anyone has used WB50 as a floor paint? I love the dark dark bown painted floor, can someone please tell me the color? Peggy what brand of liquid softener did you use for those stains? If one wanted to seal the floors with a polyurethane, is both water-based and oil-based okay? Please enter your comment!
Divide the length of the wall by the number of squares. With this measurement, mark the wall from corner to corner. Find the center point between the first two marks and note the distance from the corner to the center. Using a framing square, draw a perpendicular reference line out from the point, making it the same length as the distance from the corner to the center point. Then connect the corner to the end of the reference line. This is the side of the first square. Using a straightedge, extend the line out into the room.
Mark the entire line at intervals to match the length of the side of each pattern square. Using a framing square as a right-angle guide, complete the squares at each mark. Double-check your layout by making sure you connect back to the marks on the first wall. Then tape around the outside edges of the unmarked squares. Cut each piece of tape perfectly by tearing it against a putty knife: Hold the blade on the tape and rip away from the knife to execute a perfect cut and make sharp corners for each square.
Seal the tape to the floor by pulling the putty-knife blade over the tape to remove air bubbles and prevent paint from bleeding underneath and onto the lighter-colored squares. Continue taping until all the unmarked squares are outlined. Tip: Clean up pencil marks with a damp sponge instead of an eraser, which could damage the freshly painted base coat. The tape around each square is an excellent guide for painting, but an uneven wood floor is a difficult surface on which to tape.
So to help keep paint from bleeding under the tape, cut in the edges of each square with a brush. You can speed up the finish with a mini roller. Using a sanding sponge, lightly sand the squares to be painted and wipe them clean. Start each stroke on the tape and pull it into the square so that the color doesn't push under the edge.
Coat the entire perimeter of the square this way. While the edges are still wet, fill in the field using a mini roller. Roll the paint on in the same direction as the floorboards. Continue painting the squares in this manner until the floor is finished. Clean up any drips or mistakes by wiping them up with a damp rag while they're still wet. Remove the tape before the paint dries so that it doesn't pull up any color with it.
After the paint has dried for a full day, use a roller to apply the finish evenly across the floor. If you plan to add a second coat of paint, lightly sand the first coat before putting the second one down. Tip: The higher the gloss on paint or polyurethane, the more durable it is.
If you want the resilience of high gloss without the shine, put on a top coat of satin polyurethane to tone down the gloss. One gallon covers square feet; you'll need enough base color for two coats and enough pattern color to cover half the floor with two coats. Satin finish will look best. Skip to main content. Sign up today for our FREE email newsletters and get helpful tips delivered to your email inbox.
Turn a worn-out wood floor into a warm cottage classic with a simple checkerboard pattern.
Floor stencils - Reusable Floor and Tile Stencils For Painting Floors
Happy Monday my friends! So why another tutorial? First up is carpet removal. Not the funnest job in the world, that is for sure. Once your carpet and pad are out its time to remove the tack strips. Those are the pieces of wood along the edge of your carpet that hold it in place. You can use a myriad of tools for this from a chisel, to a hammer, to a screw driver. Basically you are using them to pry up the tack strips. Make sure when you pick them up you are wearing gloves, those suckers are sharp.
Now you have the fun job of getting off all of the carpet glue. Our carpet was laid when we moved into our house 4 years ago and the glue was still VERY sticky. Very little scraping involved. I took a few garbage bags and cut them down one side and the bottom so that they could cover a larger area. If you previously had carpet, then you are going to have lots of cute little holes along your baseboard that will need to be filled before you can paint.
Mix up a batch of Quickcrete and fill your holes its ok if you overfill them a little and let it cure overnight. The last prep step is to sand your heart out.
Sand the entire floor one direction, then sweep it up. Then sand it in the opposite direction, then sweep it up. Then sand one MORE time and this time when you sweep you want to sweep, vacuum, sweep, vacuum. Until you are SURE there is no dust left.
Take special care to sand along the edges where you filled the tack strip holes and they should blend right in. Painting a floor is hands down the easiest thing on the planet. In fact I would rather paint floors than 1 ceiling. But you do need good paint. Regular latex paint is NOT for this project.
You need something specially designed to withstand the beatings that a floor takes. It is a water based paint so no crazy fumes that is self priming and goes on so smooth. You do not want to get the wrong product when you are doing a project like this can you imagine?! You can have it tinted to any color of the rainbow, but personally I love the Extra White Base. If you are doing a top coat you will need to buy 2 of them. Pour your paint onto the corner furthest away from your door.
I usually pour an amount that is the size of a dinner plate. If you have closets in the space you will want to start there. Make sure that you are not leaving any gobs behind yes, gobs is the technical term.
Also, notice in the picture above that the holes that were filled absorb the paint more than the regular floor. So go over those extra well. Let coat 1 cure for a few hours. Once it is dry recoat following the same pattern.
Sherwin Williams Porch and Floor Enamel does not require a top coat to seal it. You can leave it just how it is with a Satin finish and be golden as the geese on Willy Wonka. DO NOT use a polyurethane on top of your floor, especially if you have used white paint. You will hate your life when it yellows.
So I would just say to one coat it and avoid that possible problem. Once your top coat is finished wait at least 24 hours to walk on it and72 hours before you put furniture on it. One question I get over and over again about painted concrete is how to clean it. Surprisingly the best method that I have come up with after trying lots and lots is dish soap and a washcloth. Put a small amount on the tough spot. Rub it in small circles with a damp washcloth. Do you have any questions about this project?
Leave them in the comments and I will answer them there! This post was written in partnership with Sherwin Williams. West Elm Knock Off Rug. Herringbone Ceiling. I was thinking about painting the concrete floor in our nursery, do you think the concrete paint will last a fair amount of time?
Oh my goodness!! You inspired me to get going. My 13 y. I stenciled a design randomly all over the floor which will mimic the design that is to be stenciled on her walls. I cannot wait to see the final result but as for painting concrete floors….. What do you do for the floor portion that meets up with the doorway? Such a good question!
The plan that I havent gotten to on my to-do list yet! I will make sure to update this post when its in! I have been on the internet for weeks trying to find hints and suggestions on painting a concrete floor in my lower level. I have been to stores etc etc, in one reading you have given me the products and no how, thank you so much. Did you say I could have the paint tinted to another color other than white? I have five dogs instead of little kids so I think white would get demolished real quick, lol.
Brent and Rachel — you want to get transition strips for the doorway. I order my through Pergo to match the one I demolished pulling up the carpet and it matches the laminate in the hallway. Use a self levelling latex.
Will run flush from threshold strip with a small gradient. May need to sand down using power sander with 60 grade sandpaper. U can hire a palm sander for about a tenner from tool hire shop.
This is a great tutorial thank you so much! Do you think it would work in a garage? Do you think it would hold up? If you use the epoxy paint, do you also need a sealer? I want my floor to be sealed…. This tutorial is great, thanks so much for sharing!!
Ok so this might be crazy but I have real hard wood floors do you think this type if paint would work on them or have you ever painted wood floors if so what would you deal it with? Hey Jacklyn! Yes this paint works really well on hardwood! Infact Brooke at All Things Thrifty has a tutorial that is just for that! If real hardwood floor sand and use a durable floor paint normally 2 coats but can do 3 coats.
Did you use a paintbrush to go around the edges or was the whole thing just done with the roller? Most of it was done with a roller, but I did have to use the paint brush to go around the edges in the closet. Does having concrete make the room colder? We painted our backyard cement and it seems really slippery especially when wet!
That is another concern of mine. We live in So. UT where it is hot ALL. In the winter it snows maybe 2x a year. The floors always feel cool but never cold, which is great in the summer! We have plywood floors upstairs. I recently tore out the linoleum in the bathrooms, carpet down the halls, and the carpet in the family room. It was a huge pain in the butt to scrape the paper and adhesive from the bathroom floors, but it was worth it.
Have you painted outdoor areas. We have a large concrete porch with a roof over it. It does get wet though.